Innovations from General Electric

Innovations from General Electric

A quite revolutionary innovation made by electricity giant General Electric, known as GE. GE is currently conducting research to build a mini power plant the size of a desk, but was able to support at least 10,000 households. Mini turbine is mentioned only a size ten times smaller than the steam turbine with the same energy output capabilities.

A unique feature of this turbine is the driving fluid are not uncommon. Not water vapor, not wind nor water! The turbine uses the fluid carbon dioxide as an energy transfer medium. Carbon dioxide is heated to 700 ° C at very high pressure to supercritical prior to entry into the turbine. Carbon dioxide out of the turbine is cooled and the pressure is increased again before going back past the same cycle.

Technology use of carbon dioxide into various key advantages of this turbine. First advantage is their small size, outsize steam turbines up to ten times smaller. From these advantages alone deliver the turbine further advantage to the startup much faster than the steam turbine. Turbine CO2 only takes one to two minutes to reach full rotational speed, compared with the steam turbine which takes up to half an hour to turn it on. In terms of efficiency, this new type of turbine is able to achieve up to 50% thermal efficiency, which is certainly far enough steam leaving the turbine efficiency is only able to achieve 45% only.

To date, still building a small-scale CO2 turbines capable of generating power up to 10 Megawatt. But planned to be built turbines with power up to 33 Megawatt, power highly enough to support approximately 10,000 households or practically equivalent to a fairly large city. Explained that the main thermal energy sources that will be used later is solar thermal, nuclear or even burning. Technology uses molten salt heat storage will also be used so that the heat from the source can be stored for use at a difficult time as a heat source in winter.

Leave a Reply

Your email address will not be published. Required fields are marked *